manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 71 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 71

Problem solving guide

71

Water inlet fault

Problem

Cause and remedy

The buzzer is sounding. 
One of the following
fault messages appears
in the display:

 

Water inlet fault 

Please open the stopcock

The stopcock is closed.

Open the stopcock fully.

 

Water intake

Before rectifying the problem:

Switch the dishwasher off using the 

 sensor.

The water intake is restricted.

Open the stopcock fully and start the programme
again.

Clean the water inlet filter (see "Maintenance").

The water pressure at the intake is lower than 50
kPa (0.5 bar).
Seek professional advice.

The following message
appears in the display
during the 

SolarSave

 pro-

gramme:

 

Intake temp. too low

The intake water has not reached the required tem-
perature of 45 °C (see "Plumbing, Connection to the
water supply").

Start the programme again.

If the fault message appears again, select a differ-
ent programme.

Summary of Contents for G 6920

















































































































Reviews:

No comments