manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 47 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 47

Operation

47

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a sensor has been
pressed or 10 minutes after the end of
the programme.

Press the 

 sensor to switch the

dishwasher back on.

The dishwasher will not switch off auto-
matically if the time of day display has
been activated (see "Settings menu,
Time of day").

The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.

At the end of the programme

The buzzer might sound at the end of
the programme.

The programme has finished when 

Prog.

finished

 appears in the display and the

door has opened slightly (if applicable).

In the 

QuickPowerWash

 programme the

door will not open until a few minutes
after the programme has finished.

If the 

Display consumption

 programmable

function is switched on, you can now
use the 

Consumption

 option to view the

actual energy and water consumption
of the programme which has just fin-
ished (see ""Settings, Consumption").

The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.

You can now empty the dishwasher.

If you have deactivated the auto-

matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.

Summary of Contents for G 6920

















































































































Reviews:

No comments