manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 55 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 55

Programme options

55

Set the time, by which the selected pro-
gramme has to be finished by.

Use the 

+/-

 sensors to set the hour

and confirm with 

OK

.

The hours will be saved and the minute
number block will be highlighted.

Use the 

+/-

 sensors to set the

minutes and confirm with 

OK

.

The 

Wait for SmartStart

 message will ap-

pear in the display.
The 

Start

 incator light will come on to

confirm that the programme has star-
ted.

The selected programme will start auto-
matically, as soon as the energy pro-
vider has sent the signal, or the latest
calculated start time has been reached.

The time remaining will appear in the
display and the 

Start

 indicator will light

up.

Changing or deleting set times

You can change the set times or the
programme before the start time in the
display is reached.

Select the 

Change

 option.

The display will change to show the
programme menu.

Select the 

Start at

, 

Finish at

 or 

EcoStart

function.

To change the set time, select the de-
sired time with 

+/-

 and confirm with

OK

.

To delete the set time, select the 

Re-

set

 option and confirm the reset time

with 

OK

.

The display will change to show the
programme menu.

Summary of Contents for G 6920

















































































































Reviews:

No comments