Miele G 673, Operating Instructions Manual

Page: 42 / 84

Switching off drying heat
In all wash programmes a heater ele-
ment helps with drying.
The drying heat can be switched off,
shortening the length of the wash pro-
grammes by approx. 2 minutes and
saving approx. 0.1 kWh energy.
The load then dries to a certain extent
in its own heat.
To assist drying the dishwasher door
can be opened partially at the end of
the programme to release moist air.
To switch off drying heat proceed as
follows:
Open the door.
Switch off the dishwasher.
Press and hold the touch pads
b
and
d
and at the same time switch
on the dishwasher.
The "On" indicator light comes on
and the
k and
c
indicator lights
flash.
Warning: If some other indicator light
flashes switch off the dishwasher and
start again.
The following indicator lights can come
on in addition to the "On" indicator light:
b
– The drying heat is already
switched off.
e
– The buzzer is switched off.
f
– Special function for the Service
Engineer only.
Additional options and functions
42