Settings
38
Running RemoteUpdate
Information about the content and
scope of a RemoteUpdate will be pro-
vided in the Miele app.
A message will appear in your dish-
washer display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
appliance is turned on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not turn the dishwasher off during
the update. Otherwise, the update
will be aborted and will not be in-
stalled.
- Some software updates can only be
carried out by Miele Customer Ser-
vice.
Display brightness
You can set the display brightness to
one of 7 different levels.
Buzzer
A sequence of audible signals will
sound at the end of the program or if
there is a fault, provided that the audi-
ble signals have been activated.
The audible signals at the end of a pro-
gram and the alarm tone in the event of
a fault will sound 4 times at intervals
with a short pause between each set.
You can deactivate the audible signal
that sounds at the end of a program if
you wish.
The alarm tone that sounds when
there is a fault cannot be deacti-
vated.
Refill reminders
If you only ever use combination deter-
gent products or automatic dispensing
using Miele PowerDisks (if available),
you can turn off the refill reminders for
reactivation salt and rinse aid if you
wish.
Please make sure that if you stop us-
ing combination detergents, you refill
the reactivation salt and rinse aid.
Turn the refill reminders back on.
