Installation
*INSTALLATION*
95
Water drainage
The appliance drainage system has a
non-return valve, which prevents dirty
water from flowing back into the dish-
washer via the drain hose.
The dishwasher is supplied with approx.
5 ft (1.5 m) of flexible drain hose with an
internal diameter of 7/8" (22 mm).
The hose can be extended using a con-
nection piece to attach a further length
of hose. The drainage length must not
be longer than 13 ft (4 m) and the deliv-
ery head no higher than 3 ft (1 m).
If the hose is to be directly connected
to the drainage outlet on site, use the
supplied hose clip (see the installation
diagram).
The hose can be directed to the left or
the right of the appliance.
The on-site connector for the drain hose
can be used for various hose diameters.
If the connector extends too far into the
drain hose, it must be shortened. Other-
wise, the drain hose can become
clogged.
Only use a Miele approved connection
piece when extending the drain line.
Only use a Miele extension drain hose.
The drain hose must not be shortened.
Lay the drain hose so that it does not
kink and is not being subjected to
pressure or tugged.
Risk of damage from leaking wa-
ter.
Leaking water can cause damage.
After servicing the appliance, ensure
that the drain does not leak.
