Miele G 5000 Operating Instructions Manual Download Page 11

Page: 11 / 104

IMPORTANT SAFETY INSTRUCTIONS



The plastic housing of the water connection contains an electrical

valve. The housing must not be dipped in water.



There are live wires in the water-intake hose. Do not shorten the

hose, even if it is too long.



The built-in Waterproof system offers reliable protection against

water damage if the following conditions are met:

- Installation has been carried out correctly.

- The dishwasher is properly maintained and parts are replaced in

case of noticeable damage.

- The water-supply faucet is turned off during longer absences from

the home (e.g., while on vacation).

The Waterproof system will work even when the dishwasher is
turned off. However, the dishwasher must remain connected to the
electricity supply.



The water-connection pressure needs to be between 7.25 and

145 psi (50 and 1,000 kPa).



A damaged dishwasher could be dangerous. If the dishwasher

gets damaged, turn it off at the electricity supply immediately and
contact your Miele dealer or Miele Customer Service.



The manufacturer’s warranty may be invalidated if the appliance is

not repaired to Miele authorized service standards.



We recommend replacing defective components with original

parts. If original Miele parts are installed correctly, Miele ensures full
compliance with safety requirements and the warranty remains valid.



During installation, maintenance, and repair work, the dishwasher

must be disconnected from the electricity supply (turn it off and with-
draw the plug from the socket).

Summary of Contents for G 5000









































































































Search results

Summary of Contents for G 5000

Reviews:

Related manuals for G 5000

Brands by name

Popular brands

Miele G 5000, Operating Instructions Manual

Search results

Summary of Contents for G 5000

Reviews:

Related manuals for G 5000

Brands by name

Popular brands