Guide to the appliance
20
Display functions
The display is used to select or set the
following:
- the program
- the Timer
- the
Settings
The display can show the following:
- the program stage
- The estimated time left for the pro-
gram to run
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the
button to switch the dish-
washer back on.
The
OK
button is used to confirm a
message or setting and also to move to
the next menu or another level.
Under
More
, a scroll bar
will ap-
pear in the right of the display. This of-
fers further options. These options can
be shown using the
buttons.
You can alter the dishwasher’s controls
to suit changing requirements in the
“Settings” menu (see “Settings”).
The option which is selected will have a
check
next to it.
To exit a sub-menu again, press the
Back
button.
If you do not press any buttons for sev-
eral seconds, the display will revert to
the previous menu. You will then have
to enter your settings again.
