Cleaning and care
74
Cleaning the water-intake filter
A filter is incorporated in the screw con-
nection to protect the water-intake
valve. If the filter is soiled, insufficient
water flows into the wash cabinet.
Risk of electric shock from volt-
age.
The plastic housing of the water con-
nection contains an electrical valve.
The housing must not be dipped in
water.
Disconnect the dishwasher from the
power supply.
To do this, turn off at the electrical
socket and withdraw the plug.
Turn off the water-supply faucet.
Unscrew the water-intake valve.
Take the seal ring out of the screw
connection.
Using pointed pliers, take hold of the
plastic filter bar and pull it through the
filter.
Rinse the filter under running water.
Reassemble in reverse order.
Screw the screw connection securely
back onto the faucet. Slowly open
the faucet. If water drips out, tighten
the connection.
Never
forget to put the filter back in
place after cleaning.
