Miele FM3 Operating Instructions Manual Download

Page: 71 / 80

Frequently asked questions

Problem

Possible cause and solution

Message in the display:



Boiler fault, cold Switch

Off/On

There is a fault.



Press the



button to switch the steam ironing

system off and then back on again.



If the fault continues to be displayed, contact
Miele Service.

Message in the display:



Release stm. button

The iron has switched itself off because it has not
been used for a period of time and the steam button



has locked.



Unlock the steam button



by pushing the slider

for continual steam on the iron forwards.

Message in the display:



Drainage fault Switch

Off/On

The residual water container has not been detected.



Press the



button to switch the steam ironing

system off and then back on again.

After switching the steam ironing system off and back
on, the residual water container has not been de-
tected.



Press the



button to switch the appliance off.



Clean and dry the metal disks (contacts) on the
residual water container.



Use the



button to switch the steam ironing sys-

tem back on and follow the instructions shown in
the display:



Remove the residual water container and fill it with
fresh tap water.



Put the filled residual water container back in the
tower.



Remove the residual water container again when
you are prompted to do so and the appropriate
messages are shown in the display.



Empty and dry the residual water container.



Put the empty residual water container back in the
tower.

The steam ironing system is ready for use again and
continues with the process that had been started
when the fault was detected.

There is a fault.



If the fault message continues to be displayed,
contact Miele Service.

Summary of Contents for FM3

















































































Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands

Miele FM3, Operating Instructions Manual

Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands