Cleaning and care
53
Empty drawer
This message may be displayed after
inserting the water container with the
descaling tablet. If you do not see this
message, you can skip the following
steps and continue as soon as you see
the
Pre-rinse
message in the display.
Set the steam ironing system to its
highest working position to remove
the residual water container later (see
"Height adjustment").
Remove the residual water container
from the tower.
The residual water may still be warm
after the rinsing process.
Drain the residual water container.
As long as the residual water container
is not inserted into the tower, the dis-
play will show the following message
Insert drawer
.
Insert drawer
Slide the residual water container
back into the tower until the container
clicks into place.
Pre-rinse
If the steam ironing system is still from
the previous use, the cool down phase
will start first. This may take up to
3 hours.
The pre-rinse phase then follows (dura-
tion approx. 20 minutes). During this
time, a portion of the descaling solution
is pumped into the steam generator.
After the pre-rinse phase you will be
prompted to carry out further actions.
This will be shown for a few seconds
before the pre-rinse phase starts and
will be indicated by the message
In
20 min.
.
