Frequently asked questions
65
Problem
Possible cause and solution
The ironing board can-
not be set in the final
position during assem-
bly or dismantling.
The ironing board became dislodged from the latch-
ing mechanism when the board was not in its lowest
position.
The resting surface of the iron remains hot af-
ter ironing.
Danger of injury by burning!
Unplug the power cord from the outlet. Let the iron
and the resting surface cool down before removing
the iron from the resting surface and proceed with
the following steps.
Press and hold the release button on the tower
(
).
At the same time, turn one of the rotary dials on
the side of the tower as far as it will go in the di-
rection of
and hold the dial in this position (
).
Push the tower down as far as possible (
).
Then let go of the rotary dial on the side and sub-
sequently release the unlocking button on the
tower.
Now the ironing board can either be folded away or
brought into its working position.
If the ironing board still will not lock into place,
contact Miele service.
