Connection
22
Guide the steam hose on the rubber
ring into the steam hose holder.
Ensure the steam hose fits tightly
and is not twisted.
Always place the iron on the resting
surface before you start ironing and
when you take a break from ironing.
This prevents damaging or discol-
oration of the ironing board cover.
Do not place the iron in its up-
right position!
It can easily tip over or fall to the
floor.
Always place the iron onto the rest-
ing surface with its soleplate down.
If the iron remains on the resting
surface for any length of time, the
surface will become hot.
Avoid direct contact with the resting
surface.
Only touch the handle.
Before turning off the iron, and be-
fore placing the iron down, make
sure you switch off the continuous
steam function.
If the continuous steam function is
not switched off, the following mes-
sage will appear in the display
Release stm. button
.
To do this, unlock the
button by
pushing the slider on the iron forward
(see "Ironing").
Condensation can form on the resting
surface. However, this does not affect
the functioning of the steam ironing
system.
