Miele FM3 Operating Instructions Manual Download

Page: 12 / 80

IMPORTANT SAFETY INSTRUCTIONS



While descaling the system, the iron or the steamer must not be

connected to the steam ironing system. The appliance can be left
unattended during this process.



The iron must not be stowed in its storage compartment when it is

connected

. This could result in damage to the steam ironing system.



Do not use the residual water container to store accessories or

similar items. The residual water container should be used only to
collect residual water.



Do not plug any objects into the apertures on the steam ironing

system. If an aperture is blocked, do not use the system.



Do not hang items of laundry on the folded steam iron system.

This may cause the steam ironing system to tip over.



Avoid ironing across hard or sharp-edged items. These can leave

marks on the soleplate.



Do not store the steam ironing system near gasoline, kerosene or

other highly flammable substances. Risk of fire and explosion!



Only use the appliance inside buildings where the ambient tem-

perature is between 50°F and 104°F.

Freezing temperatures, excessive heat and humidity will adversely
affect the functionality of the steam ironing system.



Do not store the appliance in a room where there is a risk of frost

occurring. Frozen water in the water container, steam generator and
steam hose will cause damage to the appliance.

Using accessories



Accessory parts may only be fitted when expressly approved by

Miele. If other parts are used or fitted, any claims from the warranty,
warranty and/or product liability will be invalidated.

SAVE THESE INSTRUCTIONS

Summary of Contents for FM3

















































































Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands

Miele FM3, Operating Instructions Manual

Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands