Miele FM3 Operating Instructions Manual Download

Page: 50 / 80

Cleaning and care

Starting the descaling process early



Ready



If the steam ironing system is still
switched on, press the



button on

the control panel.

You are now in the setting menu. Use
the arrow buttons to select the individ-
ual menu items.

Language 



Use the arrow buttons





to select

the

Descale

menu item.

Descale



Confirm your selection by pressing
the

button.



Select the following menu option

Start

descaling



Confirm your selection by pressing
the

button.

The descaling process starts now.

Descaling process

The following display messages will
guide you through the entire descaling
process. Only proceed with the re-
quired action if you are prompted to
do so by the appropriate message in
the display.



Detach hose



Remove the steam hose of the iron or
the steamer from the steam connec-
tion on the tower.

The iron or the steamer must not be
attached to the steam connection
during the entire descaling process.

Summary of Contents for FM3

















































































Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands

Miele FM3, Operating Instructions Manual

Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands