Miele FM3 Operating Instructions Manual Download Page 55

Page: 55 / 80

Cleaning and care



Descale

After an activation period of approx.
1 hour, the descaling solution is drained
from the steam generator into the resid-
ual water container.

The steam generator is then rinsed with
water. This rinse cycle takes approx.
5 minutes. During this time, the



Rins-

ing (5 min)

message is displayed.

During the rinse cycle the



Rinsing

message is displayed.

As soon as the rinse cycle is com-
pleted, the water is drained completely
into the residual water container and
the message



Empty drawer

is dis-

played.



Empty drawer



Remove and empty the residual water
container.

The message



Insert drawer

is now

shown in the display.



Rinse the residual water container
thoroughly.

The residual water container is dish-
washer-safe or can be washed by
hand using warm water and liquid dish
soap.



Dry the residual water container.
Make sure that the metal contact
disks (contacts) at the top of the
residual water container are cleaned
and dried properly.



Slide the residual water container
back into the tower until the container
clicks into place.

The message



Descaling finished

shown in the display.



Press the

button.

The descaling process is now com-
pleted. You can attach the iron or the
steamer back on to the steam connec-
tion on the tower.

Summary of Contents for FM3

















































































Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands

Miele FM3, Operating Instructions Manual

Search results

Summary of Contents for FM3

Reviews:

Related manuals for FM3

Brands by name

Popular brands