Supervisor level
48
- lb
Logo
You can choose whether the “Miele Professional” logo or your own logo appears in the
display.
For the
Controls
setting, the
Laundrette Logo
,
Laundrette Logo int. time
or
Laundrette Logo
ext. time
option must be selected.
- Miele Professional logo
- Customer logo
Change code
You can alter the access code to the Supervisor level.
Enter the current code.
Enter a new code.
Programme selection
Controls
You can select whether the tumble dryer is operated as a “launderette” machine. Short-
cuts are the easiest way to operate the machine. Operating staff are unable to change
pre-set programmes.
Tip:
Start by configuring all necessary settings and changes to the tumble dryer before ad-
justing any of the options below.
Caution: When activating any of these options, the Supervisor level will no longer be
available.
You will no longer be able to access the Supervisor level via the display. Please follow
the instructions below if you wish to change any other settings.
Opening the Supervisor level (launderette version)
Switch the tumble dryer on and open the dryer door.
Touch the
Start/Stop
sensor and hold it down whilst carrying out steps
-
.
Close the dryer door.
Wait until the
Start/Stop
sensor, which will now be flashing quickly, lights up con-
stantly ...
... and then release the
Start/Stop
sensor.
-
Standard
Factory default: all (selected) programmes are available.
-
Launderette, basic
12 programmes are available.
Under
Favourite programmes
, you can set which of the 12 programmes to select or
modify.
-
Laundrette Logo