Installation
*INSTALLATION*
37
y
906 mm
x
1400 mm
z
PDR 914: 1210 mm / PDR 918:
1413 mm / PDR 922: 1522 mm
To facilitate any future maintenance work, a maintenance corridor
with a width of at least 500 mm must be set up behind the machine
and must be accessible at all times. The distance between the ma-
chine and any walls must not fall below the specified minimum val-
ues.
Adjust the heat-pump dryer screw feet until the machine is level.
After the machine has been aligned, screw the washers tightly to
the base plate using a screwdriver.
Tip:
Use a spirit level to ensure correct alignment.
