Initial commissioning
17
Reference to optional external devices
Before initial commissioning, connect the Connector box or slide a
communication module into the slot on the back of the tumble dryer.
For this purpose, the tumble dryer must be disconnected from the
power supply. Then start the commissioning process.
A reference to optional external hardware appears. Confirm the in-
formation with the
OK
sensor control.
Setting the display brightness
You will be asked to select the brightness of the display.
Darker
Brighter
Display brightness
OK
Touch the segment bar for the required level of brightness.
The selected level of brightness is represented by the length of the
segment bar.
Confirm with the OK sensor control.
The display will change to the next setting.
Setting the date
22
21
19
18
2022
2021
2020
20
2019
2018
Date
OK
September
August
July
June
May
Place your finger on the value that you want to change and move
your finger upwards or downwards.
Once all values have been selected, confirm your entry with the
OK sensor control.
The display will now change to the next setting.
Confirming the time of day display query
The following question appears in the display:
Should the time of day
display not be shown?
Touch the
Yes
or
No
sensor control.
If you select
Yes
, the system will skip the
Time
settings menu.
If you select
No
, the display will switch to the
Time
settings menu.
