Miele 11 190 803, Operating And Installation Instructions, Page: 13 / 108

Warning and safety instructions
13
Cleaning and care

Risk of injury due to electric shock. The steam from a steam
cleaning appliance could reach live electrical components and cause
a short circuit. Do not use a steam cleaner to clean the appliance.

Scratches on the door glass can cause the glass to break. Do not
use abrasive cleaners, hard sponges, brushes or sharp metal tools to
clean the door glass.

The side runners can be removed (see “Cleaning and care” –
“Removing the side runners with FlexiClip runners”). Refit the side
runners correctly.

The catalytic enamelled back panel can be removed for cleaning
purposes (see “Cleaning and care – Removing the back panel”).
Ensure that the back panel is replaced correctly and do not use the
oven without it fitted.

In warm, moist environments, there is a higher probability of pest
infestations (such as cockroaches). Ensure the oven and the area
surrounding it are always kept clean.
Damage caused by pests is not covered by the warranty.
Accessories

Only use original Miele accessories. If other parts are used,
warranty, performance and product liability claims will be invalidated.

Miele will guarantee to supply functional spare parts for a
minimum of 10 years and up to 15 years following the
discontinuation of your oven.

The Miele gourmet oven dish HUB 5000/HUB 5001 (if available) must
not be inserted into shelf level 1. This will damage the floor of the oven.
The lack of clearance will create an accumulation of heat which can cause
the enamel to crack or flake off. Never place a Miele oven dish on the
upper support of shelf level 1 either as it will not be secured by the non-tip
safety notches. As a general rule, use shelf level 2.