![background image](http://html1.mh-extra.com/html/midwest/crophawk-draper-platform/crophawk-draper-platform_operators-manual_1792989042.webp)
42 CropHawk Draper Platform Operators Manu-
Feed Drum
Adjustments
Moving Feed Drum Fore & Aft
Fore and aft adjustment of the feed drum is possible by loosening
the pivot mount bolts (A) see above image. Or by moving feed
drum pivot bolt (B) to the rear position (C).
After any adjustment re-torque feed drum mount bolts (A) to 142nm
(105 ft-lb), feed drum pivot bolt (B) to 271nm (200 ft-lb).
IMPORTANT: Always ensure clearance of at least 25mm (1
inch) between feed drum and combine feeder house chains,
failure to do so may result in damage.
IMPORTANT: Adjustment of platform pitch affects drum
to
feeder house clearance.
NOTE: Always ensure feed drum fore and aft settings are matched
on both sides.
A
B
A
B
C
C
Continued on next page