![background image](http://html1.mh-extra.com/html/midwest/crophawk-draper-platform/crophawk-draper-platform_operators-manual_1792989076.webp)
76 CropHawk Draper Platform Operators Manu-
Lubrication / General Maintenance
250 Hour Checks
Split reel universal– Grease
1.
Clean grease fitting (A) and apply 3 pumps of grease.
Split reel centre bearing - Grease
2.
Clean grease fitting (B) and apply 3 pumps of grease.
NOTE: Over greasing of bearing’s can cause seal damage and
premature bearing failure.
Knife drive shaft bearings– Grease
1.
Clean grease fitting (A) on bearing housing and apply 3 pumps of
grease.
NOTE: Over greasing of bearing’s can cause seal damage and premature
bearing failure.
Change hydraulic oil filter
1.
Clean around filter head.
2.
Remove hydraulic filter (A).
3.
Coat the seal on new filter with oil and hand tighten (firm).
4.
Re-check oil reservoir level. (see 10 hour checks)
Bottom input shaft bearings– Grease
1.
Clean grease fitting (A) on bearing housing and apply 2 pumps of grease. Re-
peat procedure on opposite side of drive box.
NOTE: Over greasing of bearing’s can cause seal damage and premature bearing fail-
ure
.
A
B
A
A
A
Continued on next page