![background image](http://html1.mh-extra.com/html/midwest/crophawk-draper-platform/crophawk-draper-platform_operators-manual_1792989037.webp)
CropHawk Draper Platform Operators Manual 37
Reel
Continued on next page
Adjustments
Reel Speed Sensor Adjustment
AGCO:
The reel speed sensor is located behind the sensor
wheel. Adjust to within 2mm—3mm by loosening the 2 bolts
(A) holding the sensor. To move sensor up or down loosen the
2 bolts (B) holding the bracket to the reel drive mount and ad-
just as required.
Claas:
The reel speed sensor is located above the driven
sprocket. Adjust to within 2mm—3mm of the top teeth by loos-
ening the 2 bolts (A) holding the bracket to the reel drive
mount.
John Deere
: The reel speed sensor is located behind the sen-
sor disc. Adjust to within 2mm—3mm by disconnecting the
sensor, loosening the lock nut (A) holding the sensor and
screwing the sensor to required position. When in position
tighten the lock nut (A) and reconnect the sensor. To move
sensor up or down loosen the 2 bolts (B) holding the bracket to
the reel drive mount and adjust as required.
A
B
A
A
B
Claas Reel Height Sensor:
The
reel height sensor is used on Claas
platforms and is located on the right side reel support arm. See your com-
bine operators manual for setting and adjustment procedures. If sensor
stroke adjustment is necessary, this can be obtained by repositioning the
mounting bracket along the reel support arm.