Middleby CTX GEMINI Series, Owner'S Operating And Installation Manual

Page: 19 / 58

19
The following information provides a basic description of the oven controls,
their location upon the key-pad, and the function they perform.
Refer to Figure 3-4
B. TOP TEMPERATURE

Used to change set temperature of the top zone(s) during programming.
C. BOTTOM TEMPERATURE

Used to change set temperature of the bottom zone(s) during programming
D. COOK TIME

Used to display and/or change cook time set point of a preset menu.
E. ACTUAL

Used to briefly display actual temperature of all 4 zones for about 3 to 4 seconds.
F. Preset Menu Keys 0-9

Used to operate or program oven in one of ten preset menu modes.
NOTE: In the event of a power failure the oven will default back to the previously used preset menu when power is
restored. Always check that the oven is in the desired mode when the power is restored.
G. MANUAL OVERRIDE

Used to override preset menu setting and operate oven at any desired temperature and cook time.
H. CLEAN

Used to enter the self- cleaning mode of oven operation.
I. FEATURE

Used to initiate features. Pressed previous to entering a feature (TIMER, FORCE, CLOCK, STDBY/RESUME or
SERVICE CODES).
K. FORCE

Used to take the oven out of cleaning mode.
L. CLOCK

Used to set the oven clock
M. STDBY/RESUME

Used to enter and exit 25% reduced power standby mode.
N. SERVICE CODES

Used to access service modes.
O. Display. Provides readout of data including:

Data being entered

Error and service information

Set and actual temperatures

Set cook times

Oven status