64
A1: The Mode is set to the incorrect mode.
• Set the Mode to Playback mode ( ).
A: The SD card is write-protected.
• Set the write-protected tab on the SD card to the unlocked position.
A1: The Mode is set to the incorrect mode.
• Set the Mode to Playback mode ( ).
A2: The “Video Out” setting is set to the incorrect system.
• Enter the Setup mode, set Video Out to “NTSC” or “PAL” depending
on your video output system.
A3: The TV-out mode is switched to the incorrect mode.
• Switch to TV-out mode after making the TV connection.
A4: The DV camera is disconnected from the TV set.
• Make sure the video cable is properly connected to both the DV
camera and the TV set.
A1: The “USB Switch” setting is set to the incorrect mode.
• Enter the Setup mode, and set the USB Switch to “Direct Print”.
A2: The DV camera is disconnected from the printer.
• Make sure one end of the USB cable is connected to your printer
and the other end to your DV camera’s USB connector, then turn on
the DV camera.
Images or video/audio clips cannot
be played back.
The DV camera cannot delete
images or video/audio clips.
Images or video/audio clips cannot
be played back on TV.
Image cannot be printed directly
from a Direct-print printer.
Summary of Contents for Take-it MV500
Page 4: ...4 ...
