53
Getting the DV Camera Ready
1. Make sure the SD card*
containing the files you wish
to download is inserted in the
DV camera.
2. Make sure that the USB
Switch function is switched
to USB Mode.
If the USB Switch is set to the incorrect mode, you will
need to do the following:
a. Press the MENU button to enter the Setup mode
( ).
b. Select “
” – USB Switch,
then select —“USB Mode”.
c. Press the OK button, then the
MENU button to exit the
menu.
NOTE:
• With an SD card installed in your camera, the system
reads the contents from the SD card alone.
• Without an SD card installed in your camera, the system
reads contents from the camera's internal memory.
• The SD card may be placed into any card reader device.
The files stored on the card can then be read from the
card reader and copied to the computer.
* SD card is optional and is not included with your
purchase.
COPY TO SD
60HZ
USB
FILE. N
PWR ON
ENGLISH
USB SWITCH
OK
SELECT
WEB CAM
USB MODE
DIRECTPRINT
Connecting the DV Camera
1. Make sure your computer is turned on.
2. Connect the DV camera to your computer, using the
provided USB cable.
•
Connect the
narrow
end of
the USB cable to the DV
camera’s USB connector.
•
Connect the
flat
end of the
USB cable to the USB
connector of your
computer.
In a few moments, your computer will automatically
detect the DV camera.
Summary of Contents for Take-it MV500
Page 4: ...4 ...
