56
In addition to being viewed on the DV camera’s LCD
screen, recorded video clips or still images can be
viewed on a TV screen. The TV screen can be used to
frame the subject during video recording.
B. Viewing the Image on a TV Set
1. Make sure that both TV set and DV camera are
turned off.
2. Connect the DV camera to your TV set, using the
provided Video cable.
•
Connect one end of the
Video cable to the DV
camera’s TV-output
connector.
•
Connect the other end of the
cable to the Video-In jack of
the TV set.
When connected, a screen
appears, allowing you to switch
between Earphone mode and TV-
out mode.
3. Press the button, then OK to
switch to TV-out mode.
4. Turn on the TV set, and
select the channel through
the Video Input.
5. Power on the DV camera,
then press the MODE button.
To play back, press the
button to enter Playback mode ( ).
To use the TV screen to frame the subject during video
shooting, press the button to enter Video mode ( ).
The image will appear on the TV monitor.
To view images on a TV set, select the video output
system first.
A. Selecting a Video Output System
1. Press the MENU button to
enter the Setup mode ( ).
2. Use the 4-way arrow button
to select “ ” – Video Out,
then select “NTSC” or “PAL”.
NTSC
: For USA, Canada,
Mexico, Taiwan, Korea, Japan, etc.
PAL
: For Europe, Australia, China,
Singapore, etc.
3. Press the button, then the
MENU button to exit the menu.
Appendix A – Viewing on a Television Set
BEEP
ON
2005/06/14
DATESTAMP
ON
NTSC
03:12:15
SETUP
SELECT
2005/06/14
DATESTAMP
ON
NTSC
FORMAT
RESET
03:12:15
VIDEO
OUT
SELECT
OK
NTSC
PAL
Summary of Contents for Take-it MV500
Page 4: ...4 ...
