22 ScanMaker 1000XL Plus User Guide
B. Scanning Positive Film
1. Select the film you wish to scan, then
position the transparent films on the
scanner glass surface, as detailed in the
“Positioning Transparent Film” section
of this guide.
2. Launch ScanWizard Pro either as a
stand-alone by clicking on the program
icon, or by using the File-Import or
File-Acquire command from your
image-editing program (such as Adobe
Photoshop).
3. Go to the Preview window and choose
Positive / Positive Film
from the
Scan
Material
menu.
If this is your first time to scan transparent media, you will be prompted to
perform color calibration for your scanner. A Calibration Reminder window
appears.
2
1
0
3
4
5
6
6
5
4
3
2
1
Allows you to specify how often you
wish to be prompted to calibrate the
scanner. The default setting is 14
days
- Click the
Skip
button to exit the “Calibration Reminder” window. Clicking the
Skip button allows you to use the factory default ICC profile for your scanner.
NOTE
:
If your scanner does not include IT8 calibration targets, disregard the
Calibration reminder window whenever it appears, and click the Skip button
always.
- Click the
Calibrate
button to run the Microtek Scanner ICC Profiler (MSP)
program to perform color calibration and to customize the ICC profile for your
scanner. After finishing with calibration, relaunch ScanWizard Pro.
NOTE: The MSP program should be installed before you perform color
calibration for your scanner. For details on how to install the MSP program and
how to use it to calibrate the scanner, refer to section of the manual titled “Using
the Microtek Scanner ICC Profiler (MSP)”.
