12 ScanMaker 1000XL Plus User Guide
B. Using the 35mm Filmstrip Template
To scan 35mm filmstrips, use the 35mm Filmstrip Template, which can
simultaneously hold two strips of 6 frames each, or a total of 12 frames.
1. Place the 35mm filmstrip to be scanned inside the frame of the 35mm Filmstrip
Template. The shiny base of the 35mm filmstrip should be facing down, and the
emulsion side of the filmstrip should be facing up.
2. Place the 35mm Filmstrip Template containing the loaded filmstrip on the
scanner glass surface. Make sure to orient the template with the “Microtek”
logo facing up.
Orient template with
"Microtek" logo facing up
Align the edge of the film frame with
the arrow mark of the template
2
1
0
3
4
5
6
6
5
4
3
2
1
The
Grabber
is used to remove the
template out of the scanner glass
surface.
Important
: Align the template's front
corners firmly against the top corners
(left and right) of the
U-shaped ruler located at the front
of the scanner. During placement
of the template, make sure that the
calibration strip on the scanner glass
surface is kept clear and free of
obstruction at all times.
Calibration strip
Microtek logo
