16 XT5750 HS Scanner User's Manual
Positioning Documents
This section shows you how to position documents, such as contact sheets,
large pieces of art mechanical blueprints and a thick book on the flatbed.
Positioning a Sngle-Sheet Document
1. Raise the scanner lid, and place
the document to be scanned
face down on the glass surface
of the scanner.
2. Align the top corner of the
document with the arrow mark
(
) located at the upper-right
corner of the scan bed, with its
edges firmly against the rulers.
3. Then, lower the scanner lid.
Positioning a Book or a Bound Document
1. Raise the scanner lid, and place
a book to be scanned face
down on the glass surface of
the scanner.
2. Align the spine or inner edge of
the book with the arrow icon (
) located at the lower right
corner of the scan bed and
along the dotted line shown as
picture.
If necessary, lift the scanner lid
straight up or remove it from
the hinges when scanning a
thick book.
3. Then, lower the scanner lid.
NOTE: Do not place heavy items on the scanner's glass surface or press on the
glass surface with too much force as this will cause damage to the glass surface.
valid scan
area
