ArtixScan 6000XY Installation and Operation Manual 9
1. Shut down your computer and unplug the power cord. Next, open your computer.
2. Look for an available PCI card slot (typically white or ivory) in your computer.
Remove the slot cover, and insert the PCI SCSI card into the slot. Push the card in
to make sure it is seated all the way in the slot. This is important, as an improper
card connection will make you unable to use your scanner, and you will then have
to remove the computer case and reinsert the card.
3. Close the computer.
B. Connecting the scanner
1. Shut down your computer.
2. Connect the scanner to your computer, using the SCSI cable provided in the
scanner package.
Note: See the next section for details on termination.
(1)
SCSI
ID
TERMINA
TION
OFF
ON
6
3. Plug the power cord to the power connector at the back panel of the scanner, and
plug the other end of the power cord to your AC power source or wall outlet.
4. Turn on your scanner and wait for the lights on the front panel to stop blinking and
SCSI Card
Insert the SCSI card to the PCI
SCSI card into the slot.
Connect the SCSI cabl
e
to the Macintosh.
