16 ArtixScan 6000XY Installation and Operation Manual
Note: The 0,0 corner of the mask is approximately above the 0,0 corner of the scan bed.
For the reflective material:
• Tape the reflectives to the reflective side of the mask, according to your customized
format. Taping the originals is similar to directly place your original on the scan
bed. Make sure not to cover the barcode windows.
• To mount in the scanner, turn the mask over so that the transparency label of the
mask faces up. Align and insert the mask registration holes into the registration
pins of the glass.
Transparency side
Using the customized mask
(Note: This section should work with the software, so presently it is left blank.)
Using the slide holder
The slide holder can hold up to 20 pieces of 35mm slides. We recommend you insert
your slides row by row, that means, when the first row is full, continue to the next
row.
Transparency side
Align and insert the mask
registration holes.
Insert the slides row by row.
