10 ArtixScan 6000XY Installation and Operation Manual
stay on steady.
5. Power up your Macintosh.
C. Termination
If you are connecting the scanner in a daisy chain to other SCSI devices (such as a
CD-ROM drive), take note of the following:
A. If the scanner is the last device on the SCSI chain, set the internal terminator
switch on the back of the scanner to the “ON” position. There is no need to
install an external terminator on any of the other SCSI devices on the chain.
(1)
SCSI
ID
TERMINA
TION
OFF
ON
6
B. If the scanner is not the last device on the SCSI chain:
• Make sure the internal terminator switch located at the back of the scanner is set
to the “OFF” position.
• Make sure the last device on the SCSI chain is terminated.
C. Installing the software
Install all the software on your ScanWizard Pro CD-ROM, which contains the
ScanWizard Pro scanning software, ICC profiles and the Microtek Scanner
Profiler™ software for calibrating the ArtixScan 6000XY.
To do this, insert the ScanWizard Pro CD-ROM into your CD-ROM drive. When the
CD-ROM icon appears on your Macintosh desktop, open the software folders
individually, then double-click the Installer icon on each folder to install the
respective programs one at a time.
If the scanner is the last device,
set the terminator switch to the
“On” position.
