ArtixScan 6000XY Installation and Operation Manual 23
Note: In operation, we recommend you place cardboard on the scan bed to prevent
damaging the glass.
3. Unscrew the 4 screws which holds the 4 corners of the top cover. When unscrewed,
the screws sprint out a little, there is no need to remove the screws.
4. Gently close the top cover.
Note: Make sure the cover is closed properly. If not, it may suddenly spring open.
5. Grip the diagonal corners of the top cover, then lift it.
6. Clean the glass plate surface.
7. Reposition the top cover to its original place, then tighten the 4 screws at the upper
and lower corners.
Turn the screw
counterclockwise to
unscrew.
Clean the glass plate
surface.
