6 ArtixScan 6000XY Installation and Operation Manual
4. Switch the scanner’s power to the “On” position.
Power up self-test
The following sequence of events should take place after powering up the scanner:
• The scanner performs a self-test by homing the carriages and camera box. Through
the platen glass, you can observe the carriage moving, and you will hear a series of
clicking noises associated with the operation of the scanner motors. These “click-
ing” noises are normal. However, if you hear loud grinding noises or any other
abnormal sound, turn the scanner off immediately and contact your dealer.
• The Status lamp turns red for a few seconds when the scanner power is turned on.
• The Status lamp goes off when the scanner checks the power supply.
• The Status lamp turns green for about 30 seconds while the scanner performs self-
test. If this step is completed successfully, the lamp remains on green.
If an error occurs and the scanner is not able to start properly, the status indicators
will display a steady red light. If this happens, turn off the scanner and contact your
dealer.
Switch the scanner’s
pow er to the “On”
position.
