Microscan Visionscape FrontRunner, User Manual

Page: 89 / 152

Miscellaneous
FrontRunner™
2
v4.1.3, April 2012 Visionscape FrontRunner™ User’s Manual 2-67
What I/O Buttons Look Like
Figure 2–32 shows you what the I/O buttons look like.
FIGURE 2–32.
I/O Buttons Described
Saving I/O Buttons
The I/O button configuration is saved in the Job.
You must have the Job in the PC memory to configure I/O buttons. So, if
you want to add I/O buttons to a running Job on a camera, you must do
either of the following:
• Upload the Job to the PC, configure the I/O buttons, and then
download the Job to the camera
• Load or create a Job, configure the I/O buttons, and then download
the Job to the camera
Note: Make sure you save the Job after you configure I/O buttons.
Note: If there is a Job in PC memory that you are viewing or editing,
be aware that the button configuration that you see is for the Job in
PC memory, and not for the Job on the camera.
Physical In I/O Button
Physical Out I/O Button
Virtual I/O Button
Click to send a pulse
Click to send a pulse