Microscan Visionscape FrontRunner, User Manual

Page: 65 / 152

Windows You’ll See In FrontRunner™
FrontRunner™
2
v4.1.3, April 2012 Visionscape FrontRunner™ User’s Manual 2-43
– PPM Worst — Worst number of parts per minute.
– Idle — Amount of time within the cycle during which the
inspection was doing nothing. When your Idle time is at or very
close to 0, that is telling you that you are getting close to
overrunning.
• Overruns — The total number of overruns that have occurred so far.
Results Section
FIGURE 2–21.
Results
The results that you select for upload are displayed here. The name of the
Step and datum are displayed in the left-most column, and the actual
result data is displayed in the columns to the right. Most results in
Visionscape
®
are returned as either a single value (a distance, a tool
status, the number of blobs, etc.), or as a one-dimensional array (a point,
a line, etc.). These values are displayed immediately in the dialog. Some
results are returned as two-dimensional arrays. We refer to these as
“Complex Datums”. When a Complex Datum is in the result list, we will
not attempt to display its results every time. However, in the column
labeled with a “C” (for Complex) you will see an arrow icon displayed. In
the example above, you will notice the blue arrow next to the Data Matrix
Tool’s SymResults datum, and the Blob Tool’s “Blob Tree” datum. If you
wish to view the data for a complex result, simply click on the arrow, and it
will expand the grid to show you the data.