manualshive.com logo in svg

Microscan MS-4Xi, User Manual, Page: 68 / 360

Share
Download
Microscan MS-4Xi User Manual Download Page 68

4-4

MS-4Xi Imager User’s Manual

Calibration Options

Disabled (Shutter Speed)

When this feature is disabled, the shutter speed is fixed and is not part of the calibration 

process.

Enabled (Shutter Speed)

When this feature is enabled, shutter speed will be calibrated to provide the best possible 

image quality and performance.

Fast Shutter

The calibration process will concentrate on achieving the fastest possible shutter setting that 

will still provide good performance. The image quality or contrast may not be as good as 

what would be achieved with the 

Enabled

 setting. The calibration process is not designed to 

choose the fastest shutter speed that can decode a symbol, but rather to optimize for the 

fastest shutter speed that still provides good image quality.

Summary of Contents for MS-4Xi









































































































































































































































































































































































Reviews:

No comments