manualshive.com logo in svg

Microscan MS-4Xi, User Manual, Page: 24 / 360

Share
Download
Microscan MS-4Xi User Manual Download Page 24

1-12

MS-4Xi Imager User’s Manual

Configure the Imager in ESP

Step 10 — Configure the Imager in ESP

To make setup changes to the MS-4Xi, click the 

App Mode

 button. 

The following modes are accessible by clicking the buttons in the first row of 

App Mode

 icons:

• Click the 

EZ Mode

 button to return to EZ Mode.

• Click the 

Autoconnect

 button to establish communication.

• Click the 

Send/Recv

 button to send or receive commands.

• Click the 

Switch Model

 button to open the model menu, or to return to a previous model.

• Click the 

Parameters

 button to show the tabbed tree controls for Communication, Read 

Cycle, Symbologies, I/O Parameters, Symbol Quality, Matchcode, and Diagnostics.

• Click the 

Setup 

button to access a Camera Setup tree control and Video view, and to 

Evaluate image captures, Calibrate the imager, set the Window of Interest, fine-tune 

capture settings and processing settings in the Configuration Database, set up output 

filters and parse symbol data in Ordered Output and Output Format, and control multiple 

read cycle functions in Dynamic Setup.

• Click the 

Terminal

 button to display tube or cap detection data or decoded symbol data, 

and to send serial commands to the imager using text or macros.

• Click the 

Utilities

 button to test Read Rate, request or clear Counters, enable or disable 

the imager or send output pulses in Device Control, determine the Differences from 

Default in the current settings, add or remove master symbol data in Master Database, 

and verify or update the imager’s Firmware.

For further details, see 

ESP

 

Help

 in the dropdown Help menu. 

Summary of Contents for MS-4Xi









































































































































































































































































































































































Reviews:

No comments