manualshive.com logo in svg

Microscan MS-4Xi, User Manual, Page: 280 / 360

Share
Download
Microscan MS-4Xi User Manual Download Page 280

12-6

MS-4Xi Imager User’s Manual

Terminal Window Menus

Terminal Window Menus

Right-click on the 

Terminal

 window to display the following menu:

Terminal Dropdown Menu

The dropdown 

Terminal

 menu has 

Capture Text

, 

Save Current Text

, 

Send File

, 

Find 

Next

, and 

Find Previous 

functions, as well as the same functions defined above.

•

Copy

 selected text to clipboard.

•

Paste

 from Terminal or other text.

•

Clear

 all text in Terminal window.

•

Select All

 text in the Terminal window.

•

Save...

 brings up a 

Save As 

dialog.

•

Change Font... 

of text in Terminal; brings up a 

Font 

dialog.

•

Change Echo Font... 

to change typed text; brings up a 

Font

 

dialog.

•

Enable Echo

 enables Echo text (typed by user).

•

Change Background Color 

of Terminal window.

•

Non-Printable Characters

 allows you to hide non-printable 

characters, or to show them in 

Standard

 or 

Enhanced

 format.

•

Default Settings

 

returns all the above settings to default.

•

Keyboard Macros

 allows you to create new keyboard macro 

commands that can be sent from function keys (F2, F4, F5, etc.)

•

Capture Text...

 lets you append data in real time to a 

text file of your choice. While in operation, the text file 

cannot be opened. You can select Pause to interrupt 

the capture flow or Stop to end the flow and open the 

file.

•

Save Current Text...

 saves all text in the Terminal 

window to a text file.

•

Send File

 allows you to browse for specific files and 

send them to the reader.

•

Find Next

 searches for a user-defined section of text 

in the Terminal.

•

Find Previous

 operates in the same way as Find 

Next, but searches backward through Terminal text.

Summary of Contents for MS-4Xi









































































































































































































































































































































































Reviews:

No comments