Keep any packing behind these two holes to allow the canopy to slide fully into place.
Secure the FPV transmitter in place under the airframe or cut a slot for it to protrude outside.
Use something with a sharp edge such
as a cutting board and place it flush
with the edge of a table.
Bend the underside fuselage covering along
each half-cut line to an angle of 30 degrees.
Glue the covering in place on the underside of the fuselage working from the front to the back.
The base hatch cover then can be fitted
–
don’t overtighten the screw.
Packing
Front of canopy
Video Link