Glue the plywood brace to the balsa canopy former
Glue the 2mm plywood brace in place into the balsa base plate and set aside to dry.
Glue the 5320 /5330
servos into the wing ribs (don’t use the servo screws) noting the orientation.
Ensure you have a left and right mirrored set.
Test your radio gear to ensure the servo arm movement is correct.
Cut a bevel into these edges of the control surfaces ensuring you have a left and right pair.
Servo arm toward trailing edge
Mark the ribs as left and right
Up Elevator
Right Aileron
Video Link
Video Link
Video Link
Video Link
