Before You Start
The Mini Delta is supplied as a kit and needs to be constructed. You will need intermediate level
model building skills to complete this kit. You may also require micro soldering skills to solder the
battery leads and motor leads to your chosen receiver.
Suggested RC Gear
The kit does not include any receiver, servos, ESC, motor or propeller. Please see the list below of
suggested parts available from the MicronWings website.
Micro Receiver
2 x 5320 Servos
3 Amp Brushless ESC 500
–
950mah battery
Brushless AP03 or Brushless 10000 kv 90mm Propeller 1.5mm Prop saver
Control System Configuration
You will need to be able to set up V-Tail / Elevon mixing on your transmitter to fly this aircraft. We
suggest that you test this setup on your transmitter to ensure your transmitter is capable of this
mixing before purchasing. You can test the mixing ability of your transmitter with a standard size
receiver and servos.
Glues
This kit requires foam glue and wood glue.
* Use foam glue for all foam parts, to glue foam and balsa parts together and to glue carbon rods
* Use wood glue to glue all wooden parts together
Recommended Foam Glue
–
UHU Por Expanded Polystyrene
For most gluing in this kit, we will be bringing the parts together before
allowing the UHU Por glue to dry.
