Micromeritics SmartPrep 065 Operator'S Manual Download Page 74

Page: 74 / 131

Save All

Save All enables you to save all open files under their current names.

Close

Close enables you to close the file in the active window. The following message
is displayed if changes have been made to the file:

[file name] has been changed. Save changes before closing?

Choose one of the following:

•

Yes to save the file and close the dialog box.

•

No to discard the changes and close the dialog box.

•

Cancel to leave the dialog box open, allowing you to edit the file further.

Close All

Close All enables you to close all open files under their current names. The fol-
lowing message is displayed for each file in which changes have been made:

[file name] has been changed. Save changes before closing?

Choose one of the following:

•

Yes to save the file and close the dialog box.

•

No to discard the changes and close the dialog box.

•

Cancel to leave the dialog box open, allowing you to edit the file further.

File Menu

SmartPrep

3-12

Aug 98

Summary of Contents for SmartPrep 065




































































































































Search results

Summary of Contents for SmartPrep 065

Reviews:

Related manuals for SmartPrep 065

Brands by name

Popular brands

Micromeritics SmartPrep 065, Operator'S Manual

Search results

Summary of Contents for SmartPrep 065

Reviews:

Related manuals for SmartPrep 065

Brands by name

Popular brands