© Microhard Systems Inc.
115
4.0 Configuration
Group Subnet Gateway
Enter the Gateway for the local group network.
Values (IP Address)
(no default)
Remote Group Setup
Gateway IP Address
If the remote VPN router has a static IP address, enter the IP address of
the remote VPN Gateway here.
Values (IP Address)
(no default)
Group Subnet Mask
Specify the subnet mask of the local network address.
Values (IP Address)
255.255.255.0
Remote Security Gateway Type
Specify the method for identifying the router to establish the VPN tunnel.
The Local Security Gateway is on this router; the Remote Security
Gateway is on the other router. At least one of the routers must have either
a static IP address or a dynamic IP with server id to make a connection.
(See Local Group Setup for details)
Values (selection)
IP Only
IP + Server ID
Dynamic IP + Server ID
Server ID
This option appears when the Remote Security Gateway Type specifies
that the Server ID is required for the connection. The Server ID must be in
the format @name, where name can be anything. Both routers must know
each others names to establish a connection.
Values (IP Address)
(no default)
Next-hop Gateway IP
Next-hop Gateway means the next-hop gateway IP address for the local or
remote gateway participant's connection to the public network.
Values (IP Address)
(no default)
Next-hop Gateway IP
Next-hop Gateway means the next-hop gateway IP address for the local or
remote gateway participant's connection to the public network.
Values (IP Address)
(no default)
Group Subnet IP
Define the local network by specifying the local subnet. The local and
remote routers must use different subnets.
Values (IP Address)
(no default)
