© Microhard Systems Inc.
100
4.0 Configuration
Mode Set
Enable GpsGate Tracker Mode or TCP modes. In TCP Mode the
IPn4G will establish a connection with the GpsGate Server directly
without the SMS setup process. If the TCP connection is not
available, the IPn4G will continue to try to connect every few
seconds.
Values (selection)
Disable
Enable Tracker Mode
Enable TCP Send Mode
Server Address / IP
Enter the IP Address of the server running the GpsGate application.
Values (IP Address)
192.168.168.1
Server Port
Enter the TCP Port of the server running the GpsGate application.
Values (Port)
30175
Server Interval
Define the interval at which the IPn4G will send data to the
GpsGate Server.
Values (seconds)
60
Motion Distance
Set the motion threshold in which the IPn4G will be triggered to
send location data.
Values (meters)
100
When GPS Invalid, Sending Data
Specify what happens when the GPS data is invalid, either use the
last valid position or do not use the last valid position.
Values (selection)
Not Use Last Valid Position
Use Last Valid Position
Send IO Status
When enabled, the IPn4G will send the current status of the Digital
I/O inputs and/or outputs to the GpsGate Server.
Values (selection)
Disable
Send Input Status
Send Output Status
Send Input&Output Status
