© Microhard Systems Inc.
73
4.0 Configuration
Image 4-4-2: Wireless > Radio Configuration
4.4.2 Wireless > Radio1
Radio1 Phy Configuration
The top section of the Wireless Configuration allows for the configuration of the physical radio
module. You can turn the radio on or off, and select the channel bandwidth and frequency as
seen below.
This option is used to turn the radio module on or off. If turned
off Wireless connections can not be made. The default is On.
Radio
Values (selection)
On
/ Off
The Mode defines which wireless standard to use for the
wireless network. The IPn4G supports 802.11b/g modes as
seen here. Select the appropriate operating mode from the list.
Mode
Values (selection)
802.11B ONLY
802.11BG
The Channel-Freq setting allows configuration of which channel
to operate on, auto can be chosen where the unit will
automatically pick a channel to operate. If a link cannot be
established it will try another channel.
Channel-Freq
2.4 GHz Channels
Auto
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
