© Microhard Systems Inc.
50
4.0 Configuration
Connect Time Out (3G)
The maximum amount of time to wait for a connection The default is
90
seconds.
0-65535
Values (seconds)
Use this interface as the default route for all outbound traffic unless
specified in the Network > Routes table.
Default Route
Values (Selection)
Yes
/ No
If enabled the Bullet with use the DNS server as specified
automatically by the service provider.
Use Remote DNS
Values (selection)
Enable
/ Disable
In some cases the Static IP address must be entered in this field if
assigned by a wireless carrier. In most cases the IP will be read from
the SIM card and this field should be left at the default value.
IP Address
Values (IP Address)
(none)
Sets the modems connect string if required by the carrier. Not usually
required to be modified in North America.
Connect String (3G)
Values (string)
CONNECT
When enabled DNS-Passthrough will pass on the WAN assigned DNS
information to the end device.
DNS-Passthrough
Values (Selection)
Enable /
Disable
When unit is set to operate in IP-Passthrough mode in the general
settings, this will allow the unit to automatically assign the carrier IP to
the end device or use the specified Gateway /Netmask.
IP-Passthrough Mode
Values (Selection)
Auto
/ Manual
SIM Card-2 Settings
Settings for SIM Card-2 are identical to that of SIM Card-1, refer to the previous section for information on
how to configure SIM Card-2.
