© Microhard Systems Inc.
47
4.0 Configuration
The IPnXGii supports one or two SIM cards to be installed. By default
the primary SIM is the top SIM, and the unit will try to connect using
SIM1 first, and then if it fails to connect, or loses connection to a valid
carrier, it will then attempt SIM2.
This behavior can be modified using the
Dual Cards Management
section below.
SIM Selection
Values (Selection)
Dual SIM Cards
SIM Card-1 Only
SIM Card-2 Only
Dual Cards Management
By default the Primary SIM is the SIM installed into the SIM1 slot on
the unit. The SIM card installed into the Primary slot will be the Cellular
Carrier in which the IPnXGii will attempt to make a connection with.
This can be modified here.
Primary Slot
Values (Selection)
SIM Card-1
SIM Card-2
Start Over allows the IPnXGii to use the secondary slot to establish a
connection with the cellular carrier in the case that the primary card is
not installed or is otherwise not functioning.
Start Over
Values (Selection)
Enable
/ Disable
If enabled this feature allows the IPnXGii to switch from the currently
connected SIM (Carrier), to the alternate after it has determined that
the current carrier is not reachable. The Switch Timeout determines
when this will happen.
Switch Over
Values (Selection)
Enable
/ Disable
The amount of inactivity(time) to the current SIM (Carrier), before the
IPNXGii will switch to the alternate SIM(Carrier).
Switch Timeout
Values (Selection)
600
This allows the IPnXGii to use the currently configured System >
Keepalive settings to determine how to check if the IPnXGii has lost
connection to the current Carrier/SIM.
Keepalive
Values (Selection)
Enable
/
Disable
