© Microhard Systems Inc.
110
4.0 Configuration
4.10.7 GPS > TAIP
The IPnXGii has the ability to send GPS data in TAIP (Trimble ASCII Interface Protocol) format to up to 4
different TAIP servers. The following section describes the configuration parameters required to initialize
TAIP reporting.
Image 4-10-8: GPS > TAIP
TAIP service status
Enable or disable TAIP service on the modem. The unit can report TAIP to
up to 4 different hosts.
Values (selection)
Enable /
Disable
Remote TAIP Server
Enter the IP Address of the Remote TAIP Server.
Values (IP Address)
0.0.0.0
Socket Type
Select the socket type that is used by the Remote TAIP server. Select TCP
or UDP, this will define how the connection (TCP) or data is sent (UDP) to
the server.
Values (selection)
UDP
/ TCP
Remote TAIP Port
Enter the TCP or UDP port number used on the Remote TAIP server.
Values (TCP/UDP)
UDP
/ TCP
